Trinity Goblin User Manual

Goblin – Operational Manual
TRINITY
[32]
4. If the parameters selected are not desired, double-click again in the check box
to remove the selected parameter from the list.
5. To change the color of the selected parameters displayed at right side list (e.g.
Ir, Iy, Ib and KW) double-click on it, and then the color palette will show such as
below.
6. Select the desired color and click Ok. Now, the selected parameter will plot
with the selected color. Similarly, each selected parameter can also be plotted.
Before plotting the parameters, the background color, axis color and label color
should be specified by clicking , and so
as to represent along with the selected colors.
7. Now, click to plot a graph for the selected parameters such as
shown below.

Trinity Goblin Specifications

General

Brand	Trinity
Model	Goblin
Category	Controller
Language	English