Triton Samba User Manual

Samba
Screw the top fixing screw into position leaving
the base of the screw head protruding 6mm out
from the wall.
Hook the backplate over the top screw and fit
the bottom fixing screw into position.
DO NOT fully tighten the screws at this stage, as
the fixing holes are elongated to allow for out of
square adjustment after the plumbing
connections have been completed.
20 mm
Fig.10
Fig.9
9

Triton Samba Specifications

General

Brand	Triton
Model	Samba
Category	Bathroom Fixtures
Language	English