Triton Samba User Manual

Samba
15
To adjust the shower temperature
Alter the water temperature by increasing or
decreasing the flow rate of the water through the
shower via the temperature control (fig.20).
After obtaining your preferred shower
temperature, the number can be remembered
and left as the normal setting and should only
need to be altered to compensate for seasonal
changes in ambient water temperature.
Note: The preferred number on ‘economy’ will
give a different temperature to the same
number position on ‘high’.
To decrease the shower temperature
Turn the temperature control anti-clockwise
(fig.21); this will increase the flow of water
through the shower and be indicated by the
lower numbers.
To increase the shower temperature
Turn the temperature control clockwise
(fig.22); this will decrease the flow of water
through the shower and be indicated by the
higher numbers.
Note: It is advisable to be certain that the
showering temperature is satisfactory by testing
with your hand before stepping under the
sprayhead. There will always be a time delay of
a few seconds between selecting a flow rate and
the water reaching the stable temperature for
that flow rate.
CAUTION: It is recommended that persons
who may have difficulty understanding or
operating the shower controls should not be
left unattended while showering. Special
consideration should be given to young
children and the less able bodied.
Fig.21
Fig.22

Triton Samba Specifications

General

Brand	Triton
Model	Samba
Category	Bathroom Fixtures
Language	English