Trotec Atmos Pure User Manual

Starting the Atmos up
2. Connect the Atmos power cable to the power supply.
3. Push the exhaust hose firmly over the suction port as
far as it will go.
Notice
Use the center port to achieve good air
distribution. Close the unused connections
with the covers supplied.
4. Check all connections again to ensure they are correct
and fit tightly. Aer connecting all the hose lines and
checking the connection, the Atmos can be started up.
19

Trotec Atmos Pure Specifications

General

Brand	Trotec
Model	Atmos Pure
Category	Industrial Equipment
Language	English