TSC MB240 Series Service Manual

39
5. Install the linerless roller.
6. Remove the 2 screws and replace the cover (green) from plastic to rubber.
Linerless roller
Self-tapping screw*2;
provided in the kit
If you have the sensor bar in the linerless kit
(Serial number before C24014AD0001), please
refer to Replacing the Gap/Black Mark Sensor
Module to replace whole sensor module. (Ignore
steps 6 and 7)

TSC MB240 Series Specifications

General

Brand	TSC
Model	MB240 Series
Category	Printer
Language	English