TSC TTP-225 Series Service Manual

TTP-225/323
Bar Code Printer Service Manual
30
Sensor
Compressed air or vacuum
Monthly
Exterior
Wipe it with water-dampened
cloth
As needed
Interior
Brush or vacuum
As needed
Note:
 Do not touch printer head by hand. If you touch it careless, please use ethanol to
clean it.
 Please use 100% Ethenol. DO NOT use medical alcohol, which may damage the
printer head.
 Regularly clean the print head and supply sensors once change a new ribbon to
keep printer performance and extend printer life.
 The maximum printing ratio per dot line is 15% for this printer. To print the full web
black line, the maximum black line height is limited to 40 dots, which is 5mm for 203
DPI resolution printer.

TSC TTP-225 Series Specifications

General

Brand	TSC
Model	TTP-225 Series
Category	Barcode Reader
Language	English