TSI Instruments 5200 Series

14 Chapter 4
Command
Description
Backward
Compatible with
4000/4100 Series
SGn
Sets the gas calibration to
be used.
Yes
SGMmm
Selects the air/oxygen
mixture concentration.
Yes
SUn
Selects either standard or
volumetric units of flow.
Yes
SSTnn.nn
Sets user standard
temperature.
Yes
SSPnnn.nn
Sets user standard
pressure.
Yes
SDU2
Sets output flow units to
Cubic Feet per Minute.
Yes
LPZ
Low pressure zero.
No
SCHx
Turn humidity correction off.
No
SCDx
Turn bi-directional sensor
off.
No
Miscellaneous Commands
Command
Description
Backward
Compatible with
4000/4100 Series
Rxx
Reads the current values of
the changeable operating
parameters.
Yes
DEFAULT
Restores the values of
changeable operating
parameters to factory
default settings.
Yes
SN
Returns the serial number
of the flow meter.
Yes
MN
Returns the model number
of the flow meter.
Yes
REV
Returns the internal
firmware revision of the flow
meter.
Yes