TSI Instruments 5200 Series

28 Chapter 4
SCDx
Turn on/off flow direction sensor
SCD
Denotes set Flow direction command.
x
Denotes to turn on or off Humidity compensation.
x= 0 to turn off
x= 1 to turn on
This will turn the flow direction sensor on/off. If off then flow will
always read positive independent of direction.
SCEx
Turn on/off half inch end correction
SCE
Denotes set half-inch End correction command.
x
Denotes to turn on or off half-inch End correction.
x= 0 to turn off
x= 1 to turn on
This will turn the half-inch End correction on or off.