TSI Instruments 5200 Series

39
Appendix A
Error Codes
1
Unrecognizable
command
The flow meter uses the length of the
command and the first few letters (how
many letters depends on the command)
to recognize a valid command.
2
Number out of
range
The number entered as the operand to
a command was out of the specified
range or unrecognizable.
3
Invalid mode
One or more requested options to a
command were invalid.
4
Command not
possible
The supplied operands describe a
command that is beyond the functional
capability of the flow meter.
8
Internal error
An internal failure was detected.