Figure A-4: Switch Assembly Detail
Bracket, Latch
Toggle, Latch
Plate, Door Switch
Stop, Paddle, Door Switch
Interlock Switch (Primary)
Interlock Switch (Secondary)
Switch Screws
Door Switch Spring
Pin, Clevis, 3/16 Dia x 1”
Figure # Item Description Item Part Number Fastener Description
Fastener Part
Number(s)
1 Blower Motor i3-9040-1 NUT, 1/4-20, SERRATED HEX FLANGE, ZINC 100906 (qty 4)
2 Blower Motor Controller CON-7013
Screw, #8 X 1/2 Phillips, Truss, Type 17, Serrated,
410 SS
101688 (qty 4)
3
Door Switch (Primary/
Secondary)
102012 (x2) SCREW #4-40 X 1.25 101557 (qty 2)
4 Door Switch Assembly ENC-3050 SCREW, #8-32 X 5/8, PFH, 100 DEG, SS 102811 (qty 2)
5 Fuse, 15 Amp 100601 None None
6 Fuse, 12 Amp, ATMR 100592 (x2) None None
7 Fuse Block 103566
Screw, #8 X 1/2 Phillips, Truss, Type 17, Serrated,
410 SS
101688 (qty 2)
8 Hinge, Left ENC-3037-1
Stud, Rail Support
SCREW 8-32 X 3/8 PFLH, 100 DEG, SS
SCREW #8-32 x 1/4
HHB-8189
102809
102684
9 RTD HHC-6595
Screw, #8 X 1/2 Phillips, Truss, Type 17, Serrated,
410 SS
101688 (qty 2)
10 Spring, Door Hinge
ENC-1691 (Included in
the ENC-3037-1 kit)
None None
11 Voltage Module CON-3027 Included with kit Included with kit
APPENDIX - OVEN COMPONENTS
A-5