4. Once installation is complete, the oven will
display “Save Complete.”
NOTE: The menu file will be saved in the root
directory on the USB.
Firmware Update
TurboChef may at some point recommend a
firmware update. The update will make sure your
oven is operating at its maximum efficiency, but
should not affect cooking results or menu settings.
CAUTION: Do not remove the USB until
“Installation Complete” is displayed.
1. When the oven is off or cooling down, insert
the USB (see figure 35 page, 20). The oven will
automatically detect the USB. Touch “OK” to
proceed.
2. Load the firmware:
a. Touch “Update Firmware.”
b. Touch “OK” to confirm the selection.
3. The oven will install each firmware file included
with the update. Once installation is complete,
the oven will display “Installation Complete.”
Figure 41: USB Screen - Update Firmware
Figure 42: Update Firmware Confirmation Screen
INFO MODE
21
To Next Page
Loading...
Need help?
General
