TurboChef Eco - LEGACY CONTROLLER OPERATION; Legacy Manual Cook Mode Operation; Adjusting Legacy Manual Cook Settings; Saving Manual Settings in Legacy Mode

Overview of Info Mode
To access Info Mode, touch the “i” icon when the
oven is off, cooling down, or in manual mode.
From the Info Mode screen, access:
• Information
• Counters
• Options
• Settings
• Service
• Manufacturing (MFG)
Information Screen
From the Information screen, view
• Serial Number
• Menu Version (touch to Edit)
• Sage Firmware
• Phoenix Firmware
• Service Number
• VAC (Voltage) - View Incoming Voltage (North
America only)
• WiFi Connectivity Status
• Tutorials: View information on installing,
operating, and maintaining the oven.
Counters Screen
From the Counters screen, view
• Cook counter
• Total cook time
• Magnetron time
• Total time (oven on)
• Power Cycle Count: The number of times the
oven has cycled power.
• Menu Repair Counter
• Fault log: View time stamps of each fault
occurrence and the fault code.
Options Screen
From the Information Screen, touch “Login” to
access the Options screen. When prompted, input
the password 9 4 2 8 and then touch “ENTER.”
From the Options screen, enable/disable
• Editing
• Cook More
• Load Menu
• VAC
• Demo Mode
• Manual Cooking
• Diagnostic Mode
• F2 Bypass
Yes
INFO MODE
Editing
Cook More
Load Menu
VAC
Demo Mode
Manual Cooking
Diagnostic Mode
F2 Bypass
INFORMATION
COUNTERS
OPTIONS
SETTINGS
SERVICE
MFG
Y
es
Yes
Ye
sY
es
Yes
No
NoNo
Close
Figure 20: Options Screen
Figure 19: Counters Screen
Figure 18: Information Screen
INFO MODE
13