TurboChef NGO User Manual

Microwave System 23
Capacitors 23
Testing a Capacitor 23
Filament Transformers 23
Wiring the Filament Transformers 23
High-Voltage Transformers 24
Wiring the High-Voltage Transformers 24
Testing a Filament or High-Voltage Transformer 24
High-Voltage Diodes 24
Testing a High-Voltage Diode 25
Magnetrons 26
Testing a Magnetron for an Open/Shorted Filament 26
Stirrer Motor and Assembly 26
Waveguides 26
Troubleshooting 26
Control System 27
Control Board 27
Cooling Fans 27
Display 27
Electrical Compartment Cooling Fan Thermostat 27
Electrical Compartment Thermocouple 27
EMI Filter 27
Ethernet Extension Cable 28
Fuses 28
High-Limit Thermostat 28
Keypad 28
LED Light Ring (Sota only) 28
Magnetron Thermostats 28
Power Supply 28
Relay - K1 Filament 28
Relay - K2 Magnetron Cooling Fans 28
Relay - K3 Stirrer Motor 28
Relay - K6 Voltage 28
Relay - K7 Monitor 29
Relay - K8 Anode 29
RTD 29
Smart Card Reader 29
Solid State Relay - K4/K5 Heater 29
Speaker 29
Voltage Sensor 29
Wire Harness 29
Troubleshooting 29
Filtering System 30
Catalytic Converter 30
Air Filter 30
Vent Catalyst 30
Troubleshooting 30

TurboChef NGO Specifications

General

Model	NGO
Brand	TurboChef
Category	Oven
Exterior Finish	Stainless Steel
Plug	NEMA 6-30P
Power Requirements	208/240V, 30A, 1 Phase
Controls	Touchscreen
Catalytic Converter	Included
Power Supply	Electrical
Ventilation Requirements	Ventless operation with catalytic converter