25
V01.0| 2016/04
Programmable Gateways BLxx-PG-EN-V3
Changing the IP address
Use the function "Change IP configuration" to change the device's IP settings.
Changing the PROFINET device name
Use the function "Change device name" to change the device's IP settings.
Fig. 11: Changing the IP configuration
Fig. 12: Set PROFINET device name
NOTE
A PROFINET device name can only be assigned, if the device has already been configured
as PROFINET device via CODEYS and if the respective CODESYS
project has been loaded to the device (see chapterl 5, PROFINET-Device (page 51)).
To Next Page
Loading...
