turck BL20-PG-EN-V3 - Modbus TCP-Slave-Device; Configuring Modbus TCP-Slave-Device

49
V01.0| 2016/04
Programmable Gateways BLxx-PG-EN-V3
5.4 Modbus TCP-Slave-Device
5.4.1 Configuring Modbus TCP-Slave-Device
 Add the Modbus_TCP_Slave_Device to the Ethernet interface using the "Add Device"-function
and configure it.
 Therefore define the number of in- and output registers (input and holding registers) which have
to be exchanged with the higher-level Modbus TCP-master.
Properties
Max. number of input registers 1024
Max. number of holding registers 1024
Fig. 32: Configuring Modbus TCP-Slave-Device