turck BL20-PG-EN-V3 - Configuring the PROFINET-Device in the PROFINET-Master

53
V01.0| 2016/04
Programmable Gateways BLxx-PG-EN-V3
5.5.2 Configuring the PROFINET-device in the PROFINET-master
The following example shows the PROFINET-device configuration in TIA-Portal V13 from Siemens.
The PROFINET-CODESYS-device is configured as standard PROFINET-slave in TIA-Portal.
Hardware in the example:
 PLC: S7 CPU315-2 PN/DP, 315-2EH13-0AB0
 BL20-PG-EN-V3, FW 1.0.5.0
Installing the GSDML-file
 Install the device's GSDML-file (GSDML-V2.3-TURCK-CDS3_PN_Device--.xml) in the PROF-
INET configuration software. It can be downloaded fromwww.turck.com
 The device is added to the hardware catalog „CDS 3 PN Device“.
Fig. 36: Configuring the PROFINET-device in TIA-Portal