turck BL20-PG-EN-V3 - Executing the Functions

65
V01.0| 2016/04
Programmable Gateways BLxx-PG-EN-V3
6.2.3 Executing the functions
BACKUP_1/BACKUP_2
 Plug the storage device into the USB Host port.
 The RUN-LED flashes with 4 Hz.
 The backup is executed.
 The RUN-LED flashes orange with 1 Hz.
 The backup is completed.
 Unplug the storage device.
USB_DATA
 Plug the storage device into the USB Host port.
 The RUN-LED flashes with 2 Hz.
 The data are stored to the storage device.
 The RUN-LED flashes orange with 1 Hz.
 The storing is completed.
 Unplug the storage device.
REST
ORE_1/RESTORE_2
 Plug the storage device into the USB Host port.
 The RUN-LED flashes with 0.5 Hz.
 Press the SET-button within the next 30 seconds for at least 3 seconds.
 The RUN-LED flashes in the following order 2x green - pause (1 Hz) - 2 x green- pause (1 Hz) - .
 Loading of data is executed.
 The RUN-LED flashes orange with 1 Hz. The loading is completed.
 Unplug the storage device.
 The device is automatically restarted.
FW_UPDATE
 Plug the storage device into the USB Host port.
 The RUN-LED flashes with 0.5 Hz.
 Press the SET-button within the next 30 seconds for at least 3 seconds.
 The RUN-LED flashes in the following order 3x green - pause (1 Hz) - 3 x green- pause (1 Hz) - .
 Loading of data is executed.
 The RUN-LED flashes orange with 1 Hz. The firmware update is completed.
 Unplug the storage device.
 The device is automatically restarted.