Hardware description
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
24
3.6.7 Address setting with Turck IP Address Tool
The Turck IP Address Tool enables direct access to the Ethernet-network via the Ethernet cable.
The IP configuration, as well as the PROFINET device name of the Ethernet device can be changed
application specifically.
Search for devices
Scan the network using the "Search" button. All found Turck devices are shown.
Send WINK command
For clear device localization a Wink command can be send to the marked device using the "Wink"
button. The device responds to this Wink command with a device specific blink code (see LED dis-
plays (page 31)).
Fig. 9: Scan Ethernet network
Fig. 10: Send WINK command
To Next Page
Loading...
