turck BL20-PG-EN-V3 - Modbus TCP-Master

45
V01.0| 2016/04
Programmable Gateways BLxx-PG-EN-V3
5.2.2 Standard project with BLxx-PG-EN-V3 in CODESYS V3.5.8.10
 Create a standard project with the BLxx-PG-EN-V3 as CODESYS device.
 The CODESYS project is created.
In addition to the PLC logic, the project contains:
 Gateway LED APPL
– for free use in the program
– uses 2 bit in the device's output process image, the output data therefore start with an offset
of 1 byte in the default configuration.
 Local_IO_BLxx
– Configuration of the I/O modules locally connected to the BLxx-PG-EN-V3
 Ethernet interface
– Interface for the Modbus master or the Ethernet slaves
Fig. 26: Selecting the PG-V3 as CODESYS device
Fig. 27: CODESYS project
NOTE
The Ethernet interface needs no configuration.