Hardware description
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
26
3.6.8 Address setting via DTM
The software-tool I/O-ASSISTANT 3 (FDT/DTM) enables direct access to the Ethernet-network via the
Ethernet cable.
The IP address, as well as the subnet mask of the TURCK Ethernet stations, can be changed accord-
ingto the application by using the Busaddress Management function of the BL Service Ethernet
interface (TCP/IP) in the software I/O-ASSISTANT 3 (FDT/DTM).
Fig. 13: Busaddress management
To Next Page
Loading...
