The web server
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
74
7.11 Gateway Configuration
7.11.1 Configuration of the field bus interface
The "Gateway Configuration"-page serves for parameterizing the device's fieldbus interface:
Deactivating the USB Host port or the web server
Assigning a PROFINET device name
7.11.2 Reboot
"Reboot" executes a power-cycle at the device.
7.11.3 Reset to Factory Defaults
Resets the device to the default settings (factory settings), see also F_Reset (Reset to factory set-
ting) (page 23).
Gateway Configuration
Change the configuration in the web server.
Write the changes into the device via "Submit".
The device has accepted the new settings, the settings have become active.
Fig. 51: Web server „Gateway Configuration“
NOTE
"Reset" only resets the changes done in the web server mask back to the original values.
The function does not influence the device itself.
To Next Page
Loading...
