CODESYS-functions
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
56
5.6 EtherNet/IP™ Slave (Device)
5.6.1 Configuring the EtherNet/IP™-device in CODESYS
Add the Ethernet_IP_Slave to the Ethernet interface using the "Add Device"-function and con-
figure the length of the in- and output data, which have to be exchanged with the higher-level
EtherNet/IP™-PLC.
Properties
max. number of I/O data
496 Byte IN
4
92 Byte OUT
Fig. 39: Configuring the Ethernet/IP™-slave
To Next Page
Loading...
