55
V01.0| 2016/04
Programmable Gateways BLxx-PG-EN-V3
Configuring the in- and output data
Configure the in- and output data, which have to be exchanged with the CODESYS-device.
NOTE
The configuration of the data in TIA-Portal has
to be done in reverse order compared to
the configuration in CODESYS. Input data in TIA-Portal are output-data in CODESYS, and
vice versa.
The configured data lengths have to match.
Fig. 38: Configuration of in- and output data in TIA-Portal/CODESYS
To Next Page
Loading...
