CODESYS-functions
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
54
Configuring the PROFINET-parameters
Like for all other PROFINET-slave, the PROFINET-interface has to be configured for the CDS3 PN-
Device“ in the project.
Set all necessary IP-settings and assign a PROFINET-device name or use the device name which
has already been assigned to the device.
Fig. 37: Settings PROFINET-interface (CDS3 PN Device)
To Next Page
Loading...
