29
V01.0| 2016/04
Programmable Gateways BLxx-PG-EN-V3
3.8 Reset to factory settings
Besides the hardware rest using the rotary coding switches (seeF_Reset (Reset to factory setting)
(page 23)), the TURCK IP Address Tool as well as the web server (see Reset to Factory Defaults
(page 74)) offer the possibility to reset the devices to the factory settings.
3.8.1 IP Address Tool
NOTE
Resetting the device to factory settings via rotary coding/DIP switchesdeletes the CODE-
SYS-program in the device, see also F_Reset (Reset to factory setting) (page 23).
Resetting the device to factory settings
via DCP-based services (via Turck IP Address Tool
or TIA-Portal/Step7) does not delete the CODESYS-program (see also F_Reset (Reset to
factory setting) (page 23).
r
Fig. 18: IP Address Tool, reset to factory settings
To Next Page
Loading...
