turck BL20-PG-EN-V3 - Login;Password; Change Admin Password

71
V01.0| 2016/04
Programmable Gateways BLxx-PG-EN-V3
7.8 Login/password
In order to obtain administrator rights and thus full access to the extended functions of the web
server (Network Configuration, Station Configuration, etc.), you have to log-on to the web server as
administrator.
For the first login use the default password "password".
The default-password should be be changed by the administrator. To do so, please follow the
instructions under Change Admin Password (page 71).
7.9 Change Admin Password
Please define an individual password for administrator rights.
Default password: „password“
NOTE
Executing the „Reset to Factory Defaults“ also resets the password to "password“.
Fig. 48: Web server „password“
NOTE
For security aspects when working with the web server, please observe the notes under
Safety in the web server (page 67).
NOTE
The password for the web server is synchronized to the password for the SFTP access.
Changing the web server password also changes the see password for the SFTP access
(page page 36).
NOTE
Executing the „Reset to Factory Defaults“ (see also Reset to Factory Defaults (page 74))
also resets the password to "password“.