turck BL20-PG-EN-V3 - Page 3

Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
2
3.9.1 LED description BL20 31
3.9.2 LED description BL67 33
3.10 Real time clock (RTC) 35
3.11 SFTP access 36
3.12 Firmware update 37
3.12.1 Firmware update using USB storage device 37
3.12.2 Firmware update via DTM 37
4 Parameters and diagnostics 39
4.1 Parameters 39
4.2 Diagnostics 40
4.2.1 System diagnostics 40
4.2.2 I/O diagnostics 41
5CODESYS-functions 43
5.1 Supported CODESYS libraries 43
5.2 General start-up 44
5.2.1 Installing the device package in CODESYS 44
5.2.2 Standard project with BLxx-PG-EN-V3 in CODESYS V3.5.8.10 45
5.3 Modbus TCP-Master 46
5.3.1 Configuring the Modbus TCP-Master 46
5.3.2 Configuring the external Modbus TCP slave 47
5.4 Modbus TCP-Slave-Device 49
5.4.1 Configuring Modbus TCP-Slave-Device 49
5.5 PROFINET-Device 51
5.5.1 Configuring the PROFINET-device in CODESYS 51
5.5.2 Configuring the PROFINET-device in the PROFINET-master 53
5.6 EtherNet/IP™ Slave (Device) 56
5.6.1 Configuring the EtherNet/IP™-device in CODESYS 56
5.6.2 Configuring the EtherNet/IP™-slave in EtherNet/IP™ PLC 58
6USB Host port functions 61
6.1 Compatible storage devices 61
6.2 Functions of the USB Host port 61
6.2.1 General hints/prerequisites 62
6.2.2 Function overview 63
6.2.3 Executing the functions 65
6.2.4 Behavior of the RUN-LED in case of an error 66