133
133
Inspect for any leakage of fluid in the brake circuit.
Cover the body parts with a protective cover before
topping up the brake fluid to prevent the painted parts
from getting damaged. Incase of any fluid dripping
on body panels, it is recommended to be cleaned
immediately.
Use only BASF (DOT 4) brake fluid from a sealed
container or drain the existing brake fluid completely
from the circuit and use another brand (DOT 4) brake
fluid to avoid mix up with existing old and different brand
fluid.
Caution
Lack of maintenance of the brake system increases
the risk of accident. If you notice any malfunction in
the brake system contact nearest TVS Motor Company
Authorised Main Dealer for further diagnosis.
Check the brake fluid level only when the handle bar and
vehicle is in straight condition.
Note
Brake Pad Wear
• Visually inspect both front brake pads wear and
rear brake pads wear.
A
A
B
Fig. 52
Fig. 53
To Next Page
Loading...
Need help?
General
