171
171
Pre-Delivery Inspection
Sl. No. Description
1 Inspect the vehicle for any visible damages / scratches
2 Inspect the battery charge and terminals connections
3 Ensure first aid kit and tool kit placed in the vehicle
4 Install left and right side mirrors
5 Inspect drive chain slackness and adjust if required
6 Inspect front and rear tyre pressure and inflate to specification if required.
7 Fill the fuel in the vehicle
8 Inspect the startability of the vehicle
9 Inspect and ascertain the working of all lamps and horn
10 Inspect head lamp focus and adjust if required
11 Conduct engine start suppression test
12 Test drive vehicle and ensure proper working of all controls and system
13 Clean the vehicle thoroughly
14 Using diagnostic tool, ensure there is no error codes
15 Code the service interval (distance and time) using diagnostic tool
16 Change the menu in cluster to odometer menu before handing over the vehicle to the customer
17 Explain of the product features and operations to the customer
18 Inspect the rear brake pedal free play and adjust if required
19 Check the front wheel and rear wheel freeness
20 Ensure any additional points communicated by TVS Motor Company Limited during the course
To Next Page
Loading...
Need help?
General
