SAFE RIDING TIPS
SAFE RIDING TIPS
-06-
ACCESSORY INSTALLATION AND
SAFETY TIPS
Use extreme caution while selecting and installing
the accessories for your motorcycle.
The addition of unsuitable accessories can lead
to unsafe operating conditions. Your friendly
Distributor / Dealer will assist you in selecting
quality accessories and installing them correctly.
While selecting the accessories, make sure the
accessories should not obstruct lighting,
steerability, suspension level and ground
clearance. Please ensure that, if the tank cover is
used, it not getting en-trapped between fuel tank
and fuel tank cap.
Additional electrical equipments and controls
should not exceed the specified electrical
system load of the vehicle (capacity of battery
and magneto).
EMISSION CONTROL
All the TVS vehicles are tested in the factory for
optimum fuel efficiency and lowest possible CO
levels.
Do not disturb the Carburettor settings as this
may lead to higher fuel consumption and also
higher CO levels.
If the vehicle needs any adjustments, please
consult nearest TVS Motor Company Authorised
Distributor / Dealer or Authorised Service Centers.
While adequate care is exercised at the factory to
ensure that the emissions are within the limits, it is
essential for the owner to always maintain the
motorcycle in good condition by getting it
periodically checked and serviced by TVS Motor
Company Authorised Distributor / Dealer or
Authorised Service Centers so that the emission
and fuel consumption levels are maintained as per
norms.
Note
Have your vehicle certified by the Government
authorised emission testing stations at specified
intervals.
To Next Page
Loading...
Need help?
General
