EasyManuals Logo

TVS Apache RTR 180 Hyper Edge User Manual

TVS Apache RTR 180 Hyper Edge
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
CONTROL KEY
Apache RTR 180 comes with a pair of identical
control keys. These keys are to operate ignition
cum steering lock, fuel tank cap and cover frame R.
IGNITION CUM STEERING LOCK
There are three positions in the ignition cum
steering lock. They are:
1. ‘OFF’ position
All the electrical circuits are turned ‘OFF‘ in this
position. Engine will not start. Key can be taken
out.
2. ‘ON’ position
In this position, all the electrical circuits are turned
‘ON’ and the engine can be started now. Key
cannot be removed in this position.
3. ‘LOCK’ position
Apache RTR 180 steering can be locked in both
‘left’ and ‘right’ directions.
To lock the steering, turn the handle bar all the way
to the ‘left’ or ‘right’. Push the key in and turn it to
the ‘LOCK’ position and take out. All the electrical
circuits are turned ‘OFFin this position.
Insert the key into the lock and turn it to ‘OFF’ or
‘ON’ position to unlock the steering.
KNOW YOUR APACHE RTR 180
-12-
Note
Position lamps glows automatically once the ignition
key is turned ‘ON’ without switching on any lamps.
When the ignition switch is turned ON the
speedometer performs self test (count down starts).
Wait till the message ‘GO’ appears on the speedo
dial.
KNOW YOUR APACHE RTR 180

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TVS Apache RTR 180 Hyper Edge and is the answer not in the manual?

TVS Apache RTR 180 Hyper Edge Specifications

General IconGeneral
BrandTVS
ModelApache RTR 180 Hyper Edge
CategoryMotorcycle
LanguageEnglish

Related product manuals