TVS Apache RTR 180 Hyper Edge - Page 28

OFF
RES
KNOW YOUR APACHE RTR 180
-22-
REAR BRAKE PEDAL
Rear brake pedal is located on the right side of the
vehicle. Press the rear brake pedal with your right
foot to apply the rear brake. The brake lamp glows
on application of brake.
STANDS
Apache RTR 180 is equipped with a centre (1) and
side stand (2). To place the vehicle on the centre
stand, hold the handle bar left grip with left hand
and pillion handle L with right hand.
KNOW YOUR APACHE RTR 180
ON
Gear shift lever position can be set to your
convenience. Contact your TVS Motor Company
Authorised Distributor / Dealer or Authorised Service
Centers for setting the gear shift lever position.
Note
ON
Rear brake pedal position can be set to your
convenience. Contact your TVS Motor Company
Authorised Distributor / Dealer or Authorised Service
Centers for setting the brake pedal position.
Note
1a
2
1