RUNNING-IN INFORMATION
RUNNING-IN INFORMATION
-02-
The first 1000 km is a crucial part of your motorcycle. Proper running-in operation during this period helps in
ensuring a maximum life and smooth performance of your motorcycle.
The reliability and performance of your motorcycle depends on the special care and restrain exercised during the
running-in period. It is especially important that you avoid operating the engine in high speed (RPM), which could
expose the engine parts to excessive stress. Maximum recommended speed during the running-in is:
Maximum 50 kmph speed upto 1000 km (vary the engine speed for better mating of parts).
The first service at 500 ~ 750 km is most important. During running-in period all the engine components and other
parts will have set in. All adjustments to be restored, all fasteners to be tightened. Engine cum transmission oil to
be replaced. Timely performance of the first service will ensure optimum service life and performance from the
engine.
Caution
Replacing the engine cum transmission oil during first service is most important for better life of engine. Always use
TVS TRU4 PREMIUM , 4T oil for better performance and life.
To Next Page
Loading...
Need help?
General
