25 of 35 REF: CCU3/C-4100.DOC REV: M September 26, 2005
Figure 22: CCU/3-4100 Icon Property.
Edit its’ properties in the Properties Editor window.
Property Description
Active Should be ticked to make the CCU active.
Active Event Types Tick the events you want to monitor.
Sub-Address Address of the CCU3/C-4100, as set in CCUNET.
The default setting is 3 digit. ( i.e. 001 ) If you require
any other length, you will need to change the
address format, explained in Address Format
section. )
Custom Name (Bilingual) If your XLG is bilingual, type in the non English
description here.
Interface Select which CCUNET you are interfacing to. If you
have only one CCUNET icon, the drop down list will
show one option.
Location Type in the location of the CCU3/C-4100. Optional.
Name You can use this as a description. e.g. Type in
Engineering Building CCU3/C-4100, this name will
appear in Text mode and the History page in
XLClient if it has an event.
Panel Number The address of the 4100 panel to which the
CCU3/C-4100 is connected.
To Next Page
Loading...
Need help?
General