7 of 35 REF: CCU3/C-4100.DOC REV: M September 26, 2005
3.2.1. 4100 Programming PC – Windows Configuration
XLG C/S has an inbuilt configuration utility that can import a report file generated by
the 4100 programming software. If you are using the DOS based programming
software then you may generate a simple text file report that can be used by XLG C/S.
If you are using a 4100U Programmer you must install a Generic - Text Only printer
in windows that Prints to File.
Figure 5. Windows Generic / Text Only Printer installed.
To Next Page
Loading...