⑥
Seat height adjustment
Pull up or push down the height
adjustment lever to adjust the
seat height in 4 steps. Suitability
of each position is as follows:
ⓐ
Standard position
ⓑ
When working while observ-
ing the back
ⓒ
When working while observ-
ing the front area near the ve-
hicle.
ⓓ
When the seat is too low for
the driver
993C075A
Make sure to fasten your seat belt
to protect yourself in case of roll-
over or collision.
Never adjust the seat during driv-
ing.
•
•
WARNING
③ Seatback reclining
The angle of the seatback can
be adjusted by pulling up the an-
gle control lever.
④ Seat belt
Before driving, adjust the length
of the seat belt properly and fit
its tongue into the receptacle un-
til it clicks.
⑤ Headrest
The headrest position can be
adjusted to fit to the driver. Its
height can be adjusted by press-
ing the lock on the seatback and
headrest mounting section.
993C076A
Lifting seat
- In the position (a) with the seat emp-
ty, push down the height adjustment
lever. Then, the front section of the
seat is lifted, setting the seat into the
position (b).
•
To Next Page
Loading...
