EasyManua.ls Logo

TYM T1054 - Engine System Troubles

TYM T1054
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 -
TROUBLESHOOTING
1. ENGINE SySTEm
TROUBLE cAUSE AcTION
Engine system
Thestartmotordoesnotro-
tate when the main switch is
turned
Clutchpedalreleased
PTO ON/OFF switch set in ON
position
Defectivesafetyswitch
Batterydischarged
Loose terminal
Faulty switch
Defectivestartmotor
Depresstheclutchpedal
Set the PTO ON/OFF switch into the OFF position
Haveitrepairedorreplacedbyworkshop
Charge the battery
Checkforloosenessandcorrosion.Clean,tightenand
apply grease
Haveitrepairedorreplacedbyworkshop
Haveitrepairedorreplacedbyworkshop
The start motor runs but its
speedcannotbeincreased
Weak battery
Poorground
Incorrectviscosityofengineoil
Charge the battery
Cleanthecontactandconnectthegroundrmly
Changeengineoilwithproperviscosity
The start motor runs but the
enginecannotbestarted
Air in fuel system
Cloggedfuellter
No fuel supply
Defectiveengine
Defectivekeystopunit
Bleedthesystem
Cleanorreplacethelter
Openthecockandaddfuel
Haveitrepairedbyworkshop
Haveitrepairedbyworkshop
The engine runs irregularly
Air in fuel system
Cloggedfuellter
Cloggedinjectionnozzle
Fuel leak from pipe
Poorfuelinjection
Bleedthesystem
Cleanorreplacethelter
Haveitrepairedbyworkshop
Tighten the clamp, replace the pipe or machine the
surface of the copper washer before installation
Haveitrepairedbyworkshop

Table of Contents

Related product manuals