2. INSPECTION ITEMS
To prevent any possible failure, some
items should be checked daily.
Make sure to perform inspection be-
fore driving.
INSPECTION ITEMS
Inspect each part in the following
order:
►
①
Check the items that were
faulty yesterday
②
Go around the tractor and
check:
- Lamps for proper illumina-
tion and damage
- Tires for inflation pressure,
crack, damage and wear
- Rotating parts, including
tires, for loose bolts and nuts
- Transmission uid level
-
Implement attachment status
- Pre-cleaner for cleanness
③
Open the hood and check:
- Engine oil level
- Coolant level
- Fan belt for looseness and
damage
- A/C belt for looseness and
damage
④
Sit on the driver's seat, turn
the main switch to the "ON"
position and check:
-
Fuel gauge for proper operation
- Fuel level
- UREA Level gauge
-
Engine oil and charge warning
lamps for blinking operation
- Turn signal lamp
- Horn operation
- Brake pedal free play
- Clutch pedal play
⑤
Start the engine, drive the
tractor slowly and check:
- Emission color
- Brake pedal operation
- One brake pedal operation
- Heaviness and vibration of
steering wheel
- Coolant gauge operation
- H y d r a u l i c o p e r a t i o n o f
3-point link
To Next Page
Loading...
Need help?
General
