J10O302A
MAIN SWITCH
It is used to start and stop the en-
gine.
OFF position
Initial position. The ignition key
can be inserted and removed
in this position. If this switch is
turned to this "OFF" position dur-
ing driving, the engine stops and
the key can be removed from the
switch.
ON position
Engine running position. The
electric circuit is activated.
►
•
•
Main switch
START position
Engine starting position. When
releasing the key, the switch is
returned to the "ON" position.
•
To start the engine, set the PTO
switch in the OFF position, the
shuttle shift lever in the neutral
position and depress the clutch
pedal fully in advance.
•
NOTE
J10O361A
►
DeSOx SWITCH AND OPERATING
DESCRIPTION
1) When the Forced DeSOx switch
is set in the neutral position, the
DeSOx operation is automatically
performed for every 200 hours.
While the DeSOx operation is
automatically performed,
on the instrument panel is illumi-
nated.
J10O707B
Forced DeSOx operation ON
Forced DeSOx operation OFF
To Next Page
Loading...
Need help?
General
