Uconnect 8.4 - Page 150

3D Landmarks (Available On The Uconnect 8.4 NAV)
Press this button on the touchscreen to display 3D land-
marks while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected. Next, change Map View to 3D by
selecting Navigation Options - Settings - Map Setup - Map
View.
Digital Terrain Model (8.4 NAV Only)
Press this button on the touchscreen to display the areas
terrain while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
Park Areas
Press this button on the touchscreen to display Park Areas
while in Map View. Press and release the button on the
touchscreen until a check-mark appears, showing the set-
ting has been selected.
Railroads
Press this button on the touchscreen to display Railroad
tracks while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
City Areas
Press this button on the touchscreen to display City Areas
while in Map View. Press and release the button on the
touchscreen until a check-mark appears, showing the set-
ting has been selected.
River Names
Press this button on the touchscreen to display River
Names while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
You can press the “back arrow” button on the touchscreen
to return to the previous screen or the “X” button on the
touchscreen to exit.
Settings — Guidance
With the Map displayed, press the “Options” button on the
touchscreen, then press the “Settings” button on the touch-
screen and then the “Guidance” button on the touchscreen.
You can also access this menu by pressing the “Settings”
button in the lower right of the Nav Main Menu.
4
UCONNECT 8.4/8.4 NAV 149