The following Guidance options are available.
• Play Voice Guidance Prompts
Press this button on the touchscreen to enable Voice
Guidance Prompts during route guidance. Press and re-
lease the button on the touchscreen until a check-mark
appears, showing the setting has been selected.
• Nav Volume Adjustment
Press the “+” or “–” buttons on the touchscreen to adjust
the Nav Voice Prompt Volume.
NOTE: If the NAV Volume Adjustment setting is set
between level 0 and 11 it will default to level 12 on a vehicle
restart, if the NAV Volume Adjustment setting is set
between level 13 and 38 it will RETAIN the setting on a
vehicle restart.
• Lane Recommendation
Press this button on the touchscreen to enable Lane Rec-
ommendation during route guidance. Press and release the
button on the touchscreen until a check-mark appears,
showing the setting has been selected.
• Junction View
Press this button on the touchscreen to enable Junction
View during route guidance. Press and release the button
on the touchscreen until a check-mark appears, showing
the setting has been selected.
• Navigation Turn-by-Turn Displayed In Cluster
Press this button on the touchscreen to enable navigation
turn-by-turn displayed in vehicles cluster during route
guidance. Press and release the button on the touchscreen
until a check-mark appears, showing the setting has been
selected.
• TMC Route Mode (If Equipped)
Press this button on the touchscreen to change how the
Traffic Message Channel (TMC) Route Mode functions
during route guidance. Select from:
– Automatic
– By Delay Time
– Manual
–Off
150 UCONNECT 8.4/8.4 NAV
To Next Page
Loading...
