vi
The method for the evasion of danger according to the work item is shown.
And the dangerous action, which should not be done, is shown.
Installation and Storage Requirements
● This product is packed in the wooden crate. Please request dismantlement to a special trader.
●
Please guide equipment with the glove made of the skin, and the use of an appropriate
dismantlement tool to those who dismantle it.
● When taking out the
pump from wood frame, or lift it, instruct workers that the product should be
hung by a crane at the pump top hook, then move it.
● Only licensed worker can perform cargo handling or operate the lording machines.
● When handling is performed improperly or unpa
ck tools are improperly maintained, there will be
possibilities of falling down or topple of the pump, so no person should be underside of the pump.
Transit
● Although this pump is provided with casters, do not move it a long distance using these casters.
● If you move this pump in such a way, the load exceeds the safety criterion. You could hurt your waist.
Earthquake Resistant Measures
● To
provide earthquake resistance, the pump should be tightly fixed according to the diagram below.
If it is loosely installed, then the pump could topple or move and will produce damages for peripheral
devices.
● Piping for vacuum, cooling water, nitrogen, and
wiring, should be constructed so that they can absorb
vibration and should not produce damages on piping or run off within defined vibration level.
Piping for inlet-outlet ports ＜Installation＞
● Before start work, ensure that all hazardous energies are shut off. Refer to 2.1 For Safety Use.
Nitrogen Gas Piping ＜Installation＞
● Before start work, ensure that all hazardous energies are shut off. Refer to 2.1 For Safety Use.
● Use the supplied nuts and ferrule for piping work.
Cooling Water Piping ＜Installation＞
● Before start work, ensure that all hazardous energies are shut off. Refer to 2.1 For Safety Use.
WARNIN
WARNIN
WARNIN
WARNIN
WARNIN
WARNIN
To Next Page
Loading...
