viii
Suction and exhaust gases ＜Detaching＞
● Remove the piping according to the manual provided for the host equipment.
● Suction and exhaust pipe is
very hot for some time after pump stop. Remove the protection cover
after about one hour after the pump is shut down.
● Completely close the inlet and outlet ports with using closing flange.
Shipping
● Although this pump is provided with casters, do not move it a long distance using these casters.
●
If you move this pump in such a way, the load to move the pump exceeds the safety criterion. You
could hurt your waist.
WARNIN
WARNIN
To Next Page
Loading...
