VIRDI 4000
TM
User’s Manual
33
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
3.4.6. Gateway settings
<Gateway>
192.168. 0. 1
Press [#] to delete an old value and enter the
new value.
If the gateway IP address is ‘210.98.100.1’, enter as below:
[2] [1] [0] [9] [8] [*] [1] [0] [0] [1]
Press [ENTER] to move to the next setting.
3.4.7. Server IP settings
< Server IP >
192.168. 0. 2
Press [#] to delete an old value and enter the
new value.
If the server address is “210.98.100.121”, enter as below:
[2] [1] [0] [9] [8] [*] [1] [0] [0] [1] [2] [1]
Press [ENTER] to move to the next setting.
3.4.8. Server port settings
< Server port >
Num : 2201
Press [#] to delete an old value and enter the
new value.
The default port number of the authentication server is ‘2201’. Special care is
required when changing this number because the corresponding number in the
server should also be changed.
If the server port is ‘2201’, enter as below:
[2] [2] [0] [1]
After the network setting is complete, press the [ENTER] to return to the main
menu.