VIRDI 4000
TM
User’s Manual
41
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
menu.
3.5.6. Other setting
In the main menu, press [3] to select “3.Option”. Press [6] to see the following
screen:
1. Application
2. Verify Option
3. Set Doorlock
4. Sound Control
5. Time Setting
6. Other Setting
Press [6] for other settings.
3.5.6.1. LCD Backlight On/Off settings
◆ [*] [3] ◆[6]
<LCD Backlight>
(0=Off/1=On):
Default setting : ‘0’
This sets the LCD backlight. If set to ‘1’, the LCD backlight is on all the times.
However, if set to ‘0’, the LCD backlight is normally off and a keypad operation
or placing a card turns the backlight on. After 10 seconds have passed with no
relevant terminal operation, backlight turns off.
After the setting is complete, press [ENTER] to move to the upper menu.
3.5.6.2 Clock Sync
◆ From General setting: [*][3] [6] [ENTER] [ENTER]
<CLOCK SYNC>
0=AUTO
1=MANUAL
Default setting : ‘0’
If set to ‘0’, Time is syncronised with the connected server.
If set to ‘1’, Time from terminal is activated by the RTC.
To Next Page
Loading...
Need help?
General
