VIRDI 4000
TM
User’s Manual
51
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
settings, users’ information and authentication records (log data) are deleted,
which is factory default.
※ If this factory default initialisation is done, the language for voice output and
display characters change to English. If you need to set as another language,
refer to the following: “6. Set Device” “5. System Config” <Language>
After this initialisation is successfully done, the terminal is rebooted with a
“success” buzzer sound.
4. How to use the terminal
4.1. Access control application
- Menu “3.Option” “1.Application” [0] for access control application
4.1.1. Authentication mode
- Authentication mode display screen
== 00:00
F4 mode; authentication with [F4]
※ In the access control application, the authentication process mainly happens in
normal mode by pressing the ‘Enter’ button, or using auto sensing without pressing
any keys. For more detailed operation on the access control application, an
administrator can specify F1, F2, F3 and F4 modes at their discretion as F1, F2, F3
and F4 modes are not set as fixed modes.
- Fingerprint authentication
Fingerprint authentication to a corresponding mode; by pressing one of the
function keys: ‘Enter’, F1, F2, F3 and F4.
Fingerprint authentication through auto sensing; without pressing any keys.
This authentication is performed in the mode displayed on the screen.
To Next Page
Loading...
Need help?
General
