VIRDI 4000
TM
User’s Manual
34
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
3.5. Option settings
3.5.1. Application mode settings
In the main menu, press [3] to select “3. Option” and following screen appears:
1. Application
2. Verify Option
3. Set Doorlock
4. Sound Control
5. Time Setting
6. Other Setting
To set the basic operation mode of a terminal,
press [1].
◆ [*] [3] ◆[1]
Application:0
0=Access Ctrl
1=T&A Ctrl
The default is ‘0=Access Ctrl’.
For Access Control application, set as ‘0’. For Time & Attendance, set as ‘1’.
Press [ENTER] to move to detailed settings for each operational mode.
3.5.1.1. [0]: Access Control
There are no detailed settings under Access Control application. Moves to the
upper menu.
3.5.1.2. [1]: Time Attendance control
By setting up the default times relating to Start/Leave/Out/Back, the terminal
display mode, after authentication, can be automatically changed to program
time & attendance. In addition, by using the multi-Fn keys, over 40 sub modes
of Time & Attendance can be defined.
<Start Time>
00:00-00:00
If time setting is not necessary, set as ‘00:00-
00:00’.
To change the start time from ‘00:00~00:00’ to ‘06:00~09:59’, press [CLR] to
delete the existing setting time, and enter [0][6][0][0][0][9][5][9] in sequence.
As long as no other function button is pressed during the setting time, it
operates in start time mode. If the authentication for “not at work” (Out)
happens by pressing [F3] function key, the terminal display mode after the
authentication of “not at work” automatically changes to start time mode, which