VIRDI 4000
TM
User’s Manual
57
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
▶ If the user ID is “0001”, input “1” or “0001” and press the function key. The
light on the fingerprint input window turns on together with the voice message
“Please enter your fingerprint.’’ - when auto sensing runs, fingerprint only input is
sufficient for authentication. When a fingerprint is input, the authentication result
is displayed on the LCD window.
== 00:00
0001
If the user ID is ‘0001’, input ‘0001’ and press the
function key.
▼
== 00:00
Place your finger close to the input window when you
hear the voice message “Please enter your
fingerprint”. Do not remove your finger until you hear
a “ppig” buzzer sound.
▼
== 00:00
If authentication is successful, a “ppiririck” buzzer
sounds and the light on the fingerprint input window
turns on together with the voice message “Please
enter your fingerprint”. This process is re-iterated
until all fingerprints have been input and
authenticated.
▼
== 00:00
If authentication is successful, a success message is
displayed on the LCD together with a voice message
“You are authorised”. The door LED turns on and
door relay runs.
The default screen appears after 1~2 seconds. The
door LED turns off and door relay releases after the
door open setting time has elapsed.
※ Error message is same as that of [1:1] authentication.
4.2. Time & Attendance control
- Menu “3.Option” “1.Application” [1] T&A (Time Attendance) settings
- If start and leave time for employees are fixed, set <start time>, <leave time>
and <normal time> to reduce user input errors.
4.2.1. Authentication mode
- Authentication mode display screen
== 00:00
To Next Page
Loading...
Need help?
General
