VIRDI 4000
TM
User’s Manual
40
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
<Use Voice>
(N=0/Y=1):1
Default setting: ‘1’
To enable voice control information from the terminal, set to ‘1’. If not, set to ‘0’.
Press [ENTER] to move to the next setting.
3.5.4.2. Buzzer volume settings
<Beeper volume>
(0-2):1
Default setting: ‘1’
This sets the terminal buzzer volume. When set to ‘0’, there is no buzzer
sound. ‘1’ setting means low volume and ‘2’ means high volume.
Press [ENTER] to move to the next setting.
3.5.4.3. Case open alarm settings
<Case Open Alarm>
(N=0/Y=1):1
Default setting: ‘1’
An alarm sounds if the terminal case is damaged or opened. For this setting,
the VIRDI 4000 series have a case open sensor installed.
After the setting is complete, press [ENTER] to move to the upper menu.
3.5.5. Current time settings
◆ [*] [3] ◆[5]
In the main menu, press [3] to select “3. Option”. Press [5] to see the following
screen:
<Time Setting>
20060401211806
This sets the terminal current time. The above example represents the year
2006, month 04, date 01, hour 21, min. 18, and sec. 06. To change it, delete the
old numbers with the [#] button before adding the new numbers.
Press [ENTER] to check that the current time is updated and move to the upper
To Next Page
Loading...
Need help?
General
