VIRDI 4000
TM
User’s Manual
18
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
3. Device Configuration Settings
3.1. Check items before device configuration settings.
3.1.1. Entering menu
The following screen appears when [*] is pressed and held for over 2 seconds.
1. User
2. Network
3. Option
4. Terminal Info
5. Ext Function
6. Device
Press [0] to view menus not shown in
the LCD window.
Press a numeric key to move to a submenu. The following administrator
authentication allows for entry into submenu.
<Input AdminID>
ID : 0001
Press [ENTER] after entering the administrator’s ID. The administrator
authentication is processed according to the previous settings, such as
fingerprint authentication or password authentication. If the authentication
succeeds, submenu screen appears.
※ Administrator authentication is required only once for the main menu. All
other menus are accessible until he/she completely exits from the main
menu.
3.1.2. Changing setting parameters
To change setting parameters, press the [#] button to delete old values and
input new values.
Press [0] to see menus not shown in the LCD window, and press the
corresponding numeric key to select a menu.
Press [ENTER] for confirmation of setting parameter or to move to the next
setting. Press the [#] button to move to upper menus.
Press and hold the [#] button for over 2 sec. to cancel the current setting and
move to the upper menu.
To Next Page
Loading...
Need help?
General
